When you need custom springs, providing the right information upfront helps your spring supplier understand exactly what needs to be manufactured. A sample, detailed drawing or set of specifications gives the manufacturer a clear reference for producing the spring to your requirements.
The information needed will depend on the type of spring and how it will be used. Compression, tension and torsion springs can require different measurements, while specialised wire forms may need their own dimensional details.
So, what should you provide when requesting a quote for manufacturing springs?
Start with a Drawing
Starting with a detailed engineering drawing is the most useful option. Drawings can specify measurements, tolerances, materials and other requirements that need to be followed during production. If you don’t have this, provide as much information as you have. Your spring supplier can then identify any additional measurements required before manufacturing begins.
1. Spring Type
Start by identifying the type of spring you require. Common types include:
- Compression springs
- Tension or extension springs
- Torsion springs
- Wire forms
- Flat metal shapes
- Belleville washers
Each type has different characteristics and requires different information. For example, a compression spring may need details about its free length, coil diameter and load requirements. A torsion spring will generally require information about its legs, coil dimensions and required torque.
2. Wire Size and Material
Wire diameter is one of the fundamental specifications required for manufacturing springs. You’ll generally need to provide:
- Wire diameter
- Material type
- Material grade, where applicable
- Any specific material requirements
The material selected needs to suit the intended application. Factors such as load, operating temperature, corrosion exposure and the surrounding environment can all affect material requirements.
If you’re replacing an existing spring, the material may be identified from previous specifications or documentation. If you’re unsure, provide the sample and application details so the required specifications can be established.
3. Inside and Outside Diameter
The diameter of a coiled spring is another critical measurement. Depending on the spring and application, your supplier may need:
- Inside diameter (ID)
- Outside diameter (OD)
- Mean coil diameter
- The diameter of the component the spring needs to fit around or inside
These measurements help ensure the finished spring fits correctly within the available space. For applications where clearances are tight, accurate diameter measurements are particularly important.
4. Spring Length
The required spring length should be clearly specified. For a compression spring, this may include the free length — the length of the spring when it is not under load. You may also need to provide the required length when the spring is compressed. For an extension spring, the overall length may include the spring body and hooks or loops. If you’re supplying a drawing, make sure it’s clear which points the length measurements are taken between.
5. Number of Coils and Configuration
The number and arrangement of coils can affect how a spring operates. Depending on the spring, relevant information may include:
- Total number of coils
- Active coils
- Coil pitch
- Closed or open coils
- Coil direction
- Special coil configurations
For torsion springs, the configuration of the legs is also important. Providing accurate leg lengths, angles and positioning can help ensure the finished spring fits the intended assembly. A physical sample can be particularly useful where the coil configuration is difficult to describe through measurements alone.
6. Load, Deflection or Torque
A spring’s physical dimensions aren’t always enough to determine what it needs to do. Your spring supplier may also need performance information, such as:
- Required load
- Load at a particular length
- Maximum operating load
- Required deflection
- Spring rate
- Preload or initial tension
- Required torque for torsion springs
For example, if you’re replacing a compression spring, knowing that it needs to provide a particular load when compressed to a specific length can be just as important as knowing its diameter and free length. If you have performance data from the existing application, include it with your drawing or sample.
7. End Configuration
The ends of a spring can be an important part of the specification. Compression springs may have particular end configurations to ensure they seat correctly. Extension springs can require specific hook or loop shapes, while torsion springs may have legs formed to precise lengths and angles. If the spring needs to connect to another component, include details of how the ends need to interact with that component.
Photos can also be helpful when a particular end configuration is difficult to capture in a basic drawing.
8. Tolerances and Finishing Requirements
Not every spring requires the same level of dimensional tolerance. If certain measurements need to be controlled within specific limits, those requirements should be included in the drawing or specifications. You should also provide details of any finishing requirements, including:
- Surface treatments
- Coatings or plating
- Corrosion resistance
- Heat treatment requirements
- Other application-specific requirements
The environment in which the spring will operate is also worth mentioning. Springs used in mining, agriculture, manufacturing and outdoor applications may face very different operating conditions.
What If You Don’t Have All the Information?
You don’t need to have every specification worked out before contacting a manufacturer. If you don’t have a sample, provide your drawing, photographs and whatever measurements you have available. It can also help to explain how the spring is used. For example:
- What equipment is it fitted to?
- What does the spring need to do?
- What load or movement does it experience?
- How frequently does it operate?
- Is it exposed to heat, moisture, chemicals or other harsh conditions?
- Are there restrictions on the available space?
The more relevant information you can provide, the clearer the manufacturing requirements become.
Why Accurate Specifications Matter
Custom springs are manufactured to specific dimensional and performance requirements. Details such as wire size, diameter, length, material, coil configuration and load can all affect the finished component. Providing accurate specifications from the beginning helps ensure everyone is working from the same requirements. It also makes the quoting and manufacturing process more straightforward. For businesses searching for a custom spring manufacturer in Australia, having a sample, drawing or detailed specifications ready is an important first step.
Manufacturing Springs to Your Specifications
At Boynes Springs, we manufacture custom springs and wire forms to customer-supplied drawings and specifications. Our Osborne Park workshop is equipped for the manufacture of compression, tension and torsion springs, wire forms and other custom components. Once the required specifications, materials and quantities are confirmed, production can begin.
For many orders, our typical turnaround is around 14 days, depending on the size and complexity of the job. We conduct rigorous testing and hold all products to ISO 9001:2000 quality standards, ensuring consistent performance of your springs. If you’re unsure what information you need to provide, start with your existing spring, drawing or available measurements.
Contact Boynes Springs today with your spring drawings, samples or specifications to discuss your requirements and request a quote.